Neck Sizing

Forums Reese Bottom Chat Room Neck Sizing

Viewing 3 reply threads
  • Author
    Posts
    • #2428
      Wynne Echols
      Keymaster

      Does anyone else have problems with their neck sizing bushing scaring up the case necks? What is a good lube? Are the carbide bushings worth the money? Comments please. WWE

    • #2431
      Dave Burkart
      Participant

      Wynne,

      I use carbide dies but even with them I started to have trouble with the necks not sizing properly and springing back. I always use full length sizing but that being said when I started annealing after every firing I found the sizing became much easier and the consistency was much better.

      Dave

    • #2432
      Al Barr
      Participant

      Wynne,
      In answer to your question about case lube; I use Imperial Die Wax.

    • #2433
      Sam Entrican
      Participant

      I agree with Dave and Al. Annealing after every firing , and use imperial sizing wax . It works for me.

Viewing 3 reply threads
  • You must be logged in to reply to this topic.